+97148855001
Discuss any Queries
Menu
Discuss any Queries
The Double Couplers provide a strong positive grip when connecting standard, ledgers and joints two scaffold tube having outside dia of 48.3 mm at right angle
The Swivel Couplers provide a strong positive grip when connecting two scaffold tubes having outside dia of 48.3 mm at any angle. Typically use for connecting diagonal bracing.
The Sleeve Couplers join two scaffold tubes (48.3 mm) externally end to end. A steel divider located centrally ensures equal insertion of each tube
Specification:
MATERIAL: a) Robust design made from forged steel for durability and reliability
MATERIAL: b) T Bolts, Nuts and Washer
FINISH : Galvanized finish for corrosion resistance
Working LOAD Limit : This coupler capable of taking the full capacity of the scaffold tube. Not to be used for tension loads. Under tension loading, it is necessary to splice the joint with another scaffold tube and Swivel Couplers
A Simple and very secure method of holding ladder to scaffolding tube. Used in pairs, it ensures that ladder will not slip or lean.
Designed to featuring a one piece wrap – over. Put lock coupler connects putlog and tubes to ledger in the same way as the conventional transoms fitting. Used to securely to a scaffold standard BS 1139
MATERIAL: a) Robust design made from forged steel for durability and reliability
MATERIAL: b) T Bolts, Nuts and Washer
FINISH : Galvanized finish for corrosion resistance
Working LOAD Limit : 0.62 kN against slip at tightening torque of 54 Nm.
Designed to connect tube to beam or girder flange. Enabling fast and secure coupling of scaffold tube on a “I” Beam flange. Providing immense grip, Grave lock girder couplers compactly exceed BS 1139 slip requirements. Suitable for use in application with flange thickness of up to 4 5 mm
A Simple and very secure method of holding down scaffold board to avoid lifting by unauthorized personal or wind. Suitable for plank thickness range of 35 to 38mm
A Simple and very secure method of holding scaffolding toe board to scaffolding tube, it ensures that toe board to avoid lifting by unauthorized personal or wind.
MATERIAL: a) Robust design made from forged steel for durability and reliability
MATERIAL: b) T Bolts, Nuts and Washer
FINISH : Galvanized finish for corrosion resistance
Product Images
ASCEND Aluminium scaffold couplers can require less care than steel due to the deterrence of corrosion and rust from humid areas and weather. Aluminium Scaffold couplers suitable for a chemical and marine, offshore environments. Any risk of damage is related to the concentration and temperature of the chemical solution.
The Double Couplers provide a strong positive grip when connecting standard, ledgers and joints two scaffold tube having outside dia of 48.3 mm at right angle
Specification:
MATERIAL : a) Robust design made from Aluminium 6061 alloy for durability and reliability
MATERIAL : b) Replaceable I Bolts, Nuts and Washer
FINISH : Mill Finishing
Slipping Force : 21.15KN
The Swivel Couplers provide a strong positive grip when connecting two scaffold tubes having outside dia of 48.3 mm at any angle. Typically use for connecting diagonal bracing.
Specification:
MATERIAL: a) Robust design made from aluminium 6061 alloy for durability and reliability
MATERIAL: b) I Bolts, Nuts and Washer
FINISH : Mill Finishing
SLIP FORCE: 10.35 KN
